EXTA FREE

Wireless
control

PRODUCTS EXTA FREE - WIRELESS CONTROL

WIRELESS CONTROL SET-LIGHTING 2-CHANNEL TYPE: RZB-04

Product Description

Radio flush receivers are used both as
elements in mounting in flush and surface
installation cable boxes and as an actuator
built directly in lighting fitting casings and
other receivers). ROP-02 enables operation
in 5 different modes (switching on, switching
off, monostable mode, bistable mode, time
mode.
Symbol

RZB-04

PRODUCT FUNCTIONAL FEATURES:

  • complete set of wireless control (4–channel button radio transmitter RNK-04 and 2-channel radio flush receiver ROP-02).
  • easy flush installation Ø60 mm,
  • operation is optically signalled,
  • 2 output relays (dry contacts 230V AC),
  • 5 operation modes: switching on, switching off, monostable mode, bistable mode, time mode (switch off delay),
  • low current consumption, possibility of constant operation,
  • lighting, heating operation control, other receivers control,
  • wide operation range (up to 200 m),
  • possibility of increasing operation range by means of RTN-01 retransmitter.
Rated supply voltage 3 V
Nominal supply voltage of the receiver 230 V
Battery type CR2032
Battery life from 3 to 5 years
Number of channels 4
Number of channels receiver 2
Transmission radio
Frequency transmission 868, MHz
Transmission method one-way
Maximum range in open area 250 m
Maximum range in the open area of ​​the receiver 250 m
Optical signaling of operation LED red
Working temperature DOD0851 °C
Supply voltage tolerance of the receiver -25 %
Rated supply voltage of the receiver 50/60 Hz
Rated current consumption of the receiver 0,39 „standby” mode/ 0,69 1 chanel mode / 1,09 2 chenels mode W
Number of operating modes of the receiver 5
Maximum number of transmitters 32
Set time from 1 s
Parameters of relay contacts 2NO 5A / 250V AC3 1250 VA
Number of connection terminals / cables 6
Working position free
Fixing the housing expansion pin, adhesive tape
Protection degree IP20
Protection class III
Protection class of the receiver II
length 90 mm
receiver's length 47,5 mm
width 80 mm
receiver width 47,5 mm
height 11,5 mm
receiver height 20 mm
Weight 0,03 kg
Weight of the receiver 0,03 kg
Receiver power supply terminals OUT1, OUT2 - voltage outputs
External triggering clamps IN1, IN2