WDN-touch switch 03 is used to touch on and off lighting. It has one output voltage of 230 V AC. It is adapted to control lighting a traditional (halogen incandescent fluerescencyjne) or a diode. The maximum power connected to the output circuit should not exceed 300 W (for incandescent bulbs). In the case of low voltage light sources (halogen lamps 12 V AC LED lighting) to the output switch WDN-03 is necessary to connect the transformer / AC LED adapted to the power consumption of the light source. WDN-03 equipped with an automatic calibration process a change of connection of the sensor or a change in tactile surface. This allows the sensor switch can be connected up to larger conductive surface.In addition, they applied structural solutions allow safe use of the switch, even by people with a pacemaker. WDN-touch switch 03 is adapted for mounting on surfaces such as wood and wood materials for a thickness greater than 2 mm. Switch meets the requirements of harmonized standards in the field of safety and electromagnetic compatibility.