EXTA
Automation
buildings
PRODUCTS EXTA - BUILDING AUTOMATION
MICROWAVE MOVEMENT DETECTOR TYPE: MCR-01
Product Description
The microwave motion detector is an active motion detector. The integrated motion sensor sends high frequency electromagnetic waves (5.8 GHz) and receives an echo. The sensor detects echo changes caused by even the slightest movement in the observed area. In this case, the microprocessor issues the "LIGHT ON" command. Thanks to its high sensitivity, motion detection through doors, glass or plasterboard walls is possible.
PRODUCT FUNCTIONAL FEATURES:
- Motion detection through glass, plastics, plasterboard
- built-in adjustable twilight sensor (2 ÷ 2000 lx)
- Low transmitting power (<10 mW)
- High sensitivity and very good detection of movement towards or from the detector movement
- built-in adjustable time relay (8 s ÷ 12 min)
- Low power consumption (0.9 W)
- No influence of temperature on detection
- smooth adjustment of operating range (3 ÷ 10 m),
APPLICATION:
Nominal voltage 230 V
Mounting method Montaż natynkowy
Voltage type AC
Staircase monitoring Tak
Max. transmission range frontally 10 m
Max. transmission range sideways 10 m
Max. switching power 1200 W
Max. starting current 10 A
Response value luminosity 2/2000 lx
Degree of protection (IP) IP20
Detection angle horizontal 0/360 °
Max. duty cycle 12 min
Optimum mounting height 2,8 m
Rated frequency 50/60 Hz
Protection degree IP20
Width 90 mm
Height 41,5 mm
Depth 41,5 mm
Weight 0,07 g
Light sensor internal
Setting range of lighting sensor 2÷2000 lx - smooth adjustment
Lighting time 8 s÷12 min - smooth adjustment
Motion detection angle 360 °
Load limit 1200 W
Length of packaging 4,3 cm
