EXTA FREE
Wireless
control
PRODUCTS EXTA FREE - WIRELESS CONTROL
GSM REMOTE POWER SWITCH DEVICE 2-CHANNEL MODULAR TYPE: GRM-10
Product Description
The GRM-10 device is used for the implementation of simple control and notification operations. The operations are carried out via a GSM network. The controller has two independent outputs with a maximum load capacity of 16 A / 250 V AC. Two digital inputs enable coupling to alarm control panels. The RS485 interface in connection with the RXM-01 translator gives the ability to control EXTA FREE system receivers from a mobile phone via user-defined SMS messages. The multitude of operating modes and configuration options make the GRM-10 a device extremely useful in simple home and industrial automation systems. GRM-10 is made in a 3-MOD enclosure and is intended for installation in switchboards on a DIN rail.
PRODUCT FUNCTIONAL FEATURES:
- Remote control of the electrical devices by means of commands (incoming phone connection, text message) sent from a mobile phone,
- Operation is optically signalled (power supply, relay status, GSM modem status)
- Comfortable control of difficult access devices (air conditioning, heating, etc.),
- Low power consumption, a possibility of continuous operation.
- Two relay outputs with the load capacity of 16 A,
APPLICATION:
Mounting method Inne
Current supply 230 V AC
Number of relays 2
Number of commands 5
Suitable for degree of protection (IP) IP20
Rated supply voltage 230 V
Maximum range in open area limited by structure of GSM network m
Optical signaling of the supply voltage dioda LED zielona
Optical indication of RS-485 transmission LED
GSM status indication LED (yellow)
GSM frequency 900/1800/1900 MHz
Working temperature DOD0851 °C
Power supply tolerance -25 %
Rated supply voltage 50/60 Hz
Rated supply voltage of the receiver 1,5 W
Parameters of relay contacts 2 x NO 16 A / 250 V AC AC1 4000 VA
Working position free
Fixing the housing rail TH35
Protection degree IP20
length 3 modules casing mm
Weight 0,16 kg
interfaces RS485 MODBUS - clamps A,B,C
Number of outputs 2
Number of inuts 2
Input types Cyfrowe – potencjał +4 V
Output status indication 2x LED red
Position on RS485 bus MASTER only
Package width 9,300 cm
Depth of package 8,500 cm
Gross weight (product in packaging) 0,300 kg
